Cisco AS5350 - Universal Access Server - Page 6

Contents
vi
Cisco AS5350 and Cisco AS5400 Universal Gateway Software Configuration Guide
OL-3418-02 B0
Clear Ports 5-5
Port Configuration Mode 5-5
Managing SPEs 5-6
SPE Country 5-6
SPE Configuration Mode 5-8
Troubleshooting 5-9
Configure SPE Diagnostic Tests 5-9
SPE Recovery 5-11
SPE Download Maintenance 5-11
Upgrading SPE Firmware 5-12
Important Upgrade Commands 5-13
Displaying SPE Firmware Versions 5-13
Upgrading SPE Firmware from the Cisco.com FTP Server 5-14
Using SPE Firmware Bundled with Cisco IOS Software 5-20
Health Monitor 5-22
Interface Queue Wedge Monitor 5-23
Where to Go Next 5-27
CHAPTER 6 Configuring Voice over IP 6-1
VoIP Basics 6-2
Call Flow 6-3
Dial Peers 6-4
Configuring Basic VoIP 6-6
Perform Preconfiguration Tasks 6-6
Configure Signaling on Voice Ports 6-7
Configure Dial Peers 6-8
Configuring Nextport Echo Canceller Control (optional) 6-12
Voice QoS Basics 6-15
Enabling QoS Features for VoIP 6-16
Congestion Management 6-16
Fragmentation and Interleaving 6-19
Traffic Shaping for Frame Relay 6-19
Other Bandwidth-Reduction Features 6-20
Additional Resources 6-23
APPENDIX A Using the Setup Script A-1
Getting Started A-1
Cisco AS5350 or Cisco AS5400 with AS54-DFC-CT3 and AS54-DFC-108NP A-2