Cisco ASR 9904 - Card; Figure 2-25 2-Port 10-Gigabit Ethernet + 20-Port Gigabit Ethernet (2 X10 Ge + 20 X1 Ge) Combination Line Card Block

2-32
Cisco ASR 9000 Series Aggregation Services Router Overview and Reference Guide
OL-17501-09
Chapter 2 Functional Description
Ethernet Line Cards
2-Port 10-Gigabit Ethernet + 20-port 1-Gigabit Ethernet (2x10GE + 20x1GE) Combination Line Card
The 2-port 10-Gigabit Ethernet + 20-port 1-Gigabit Ethernet (2x10GE + 20x1GE) combination line card
has two 10-Gigabit Ethernet XFP module ports and 20 Gigabit Ethernet SFP module ports. Each port
(XFP or SFP) connects to an XAUI interface on one of the four NPUs. The 2x10GE + 20x1GE
combination line card supports WAN PHY and OTN modes as well as the default LAN mode.
The 2x10GE + 20x1GE combination line card is available in base, extended, and low-queue versions. All
versions are functionally equivalent, with the extended version of the line card providing typically twice
the service scale of the base line card.
Figure 2-25 shows the block diagram for the 2x10GE + 20x1GE combination line card, and Figure 2-26
shows the front panel connectors and indicators.
Figure 2-25 2-Port 10-Gigabit Ethernet + 20-Port Gigabit Ethernet (2x10GE + 20x1GE) Combination
Line Card Block Diagram
2x10GE + 20x1GE Combination Line Card
194815
B
a
c
k
p
l
a
n
e
Fabric
Interface
Chip
GE
PHY
CPU
GE
SW
To FPGAs
To NPUs
FPGA
NPU
NPU
FPGA
10GE XFP
10GE XFP
NPU
NPU
10x1GE SFP
10x1GE SFP