Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router User Manual

4-82
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 4 Software Upgrade Process
Upgrade Process With Service Impact for Nonredundant Platforms
Step 9
issu loadversion rp 0 file
file-system
:asr1001-{rpaccess,rpios,rpcontrol}*versio
n-string
*.pkg bay standby-bay force
Example:
Router# issu loadversion rp 0 file
bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02.
01.S.151-1.S1_2*.pkg bay 1 force
Upgrade the RPAccess, RPIOS, and RPControl
subpackages in the standby bay.
Step 10
issu commitversion
Example:
Router# issu commitversion
Once the SSO state is reached, commit the software
version.
Step 11
redundancy force-switchover
Example:
Router# redundancy force-switchover
Force a switchover from the active IOS process to the
standby IOS process.
Note Your connection to the router often drops and is
expected behavior at this point of the procedure
in many scenarios.
If this step drops your connection to the router,
wait a few minutes before reconnecting to the
router and then continue to
Step 12.
Step 12
show platform
Example:
Router# show platform
(Optional) Monitor system state to ensure both IOS
processes are active.
Step 13
issu loadversion rp 0 file
file-system:asr1001-{rpaccess,rpios,rpcontrol}*vers
ion-string*.pkg bay
standby-bay force
Example:
Router# issu loadversion rp 0 file
bootflash:asr1001-{rpaccess,rpios,rpcontrol}*03.02.
01.S.151-1.S1_2*.pkg bay 0 force
Upgrade the RPAccess, RPIOS, and RPControl
subpackages in the standby bay (a different bay than in
Step 9).
Step 14
issu commitversion
Example:
Router# issu commitversion
Commit the software version.
Command or Action Purpose

Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Specifications

General

Brand	Cisco
Model	ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
Category	Network Router
Language	English