Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router User Manual

4-119
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 4 Software Upgrade Process
Upgrade Process With Service Impact for Nonredundant Platforms
Deleting file
bootflash:asr1000rp1-espbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file
bootflash:asr1000rp1-packages-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_200
80924_0100_1.conf ... done.
Deleting file
bootflash:asr1000rp1-packages-adventerprisek9.BLD_V122_33_XNB_ASR_02.02.01.122-33.XNB1_LAT
EST_20080924_0100_1.conf ... done.
Deleting file
bootflash:asr1000rp1-rpaccess.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file
bootflash:asr1000rp1-rpbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file
bootflash:asr1000rp1-rpcontrol.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pk
g ... done.
Deleting file
bootflash:asr1000rp1-rpios-adventerprisek9.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_200809
24_0100_1.pkg ... done.
Deleting file
bootflash:asr1000rp1-sipbase.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file
bootflash:asr1000rp1-sipspa.BLD_V122_33_XNA_ASR_RLS1_THROTTLE_LATEST_20080924_0100_1.pkg
... done.
Deleting file bootflash:packages.conf.00- ... done.
Deleting file bootflash:packages.conf.01- ... done.
Deleting file bootflash:packages.conf.02- ... done.
Deleting file bootflash:packages.conf.03- ... done.
Deleting file bootflash:packages.conf.04- ... done.
Deleting file bootflash:packages.conf.05- ... done.
SUCCESS: Files deleted.
Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router (request
platform Command Set)
This section provides instructions on using software upgrade for Cisco ASR 1002 or 1004 Router
running subpackages using the request platform command set.
These instructions assume two IOS processes are active on the RP and that the router is already running
using subpackages. For information on checking and configuring two IOS processes on the same RP, see
the
“Using SubPackages for Software Upgrade on a Cisco ASR 1002 or Cisco ASR 1004 Router
(software upgrade Command Set)” section on page 4-94.
SUMMARY STEPS
1. show version
show version installed
dir filesystem:<directory>
show platform
show redundancy-states
2. redundancy
mode sso

Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Specifications

General

Brand	Cisco
Model	ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
Category	Network Router
Language	English