Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router User Manual

7-14
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 7 Configuring Call Home
How to Configure Call Home
DETAILED STEPS
Renaming a Destination Profile
To change the name of an existing profile, complete the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. rename profile source-profile target-profile
DETAILED STEPS
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters call home configuration mode.
Step 3
copy profile source-profile target-profile
Example:
Router(cfg-call-home)# copy profile profile1
profile2
Creates a new destination profile with the same
configuration settings as the existing destination profile,
where:
• source-profile—Specifies the existing name of the
profile.
• target-profile—Specifies a name for the new copy of
the profile.
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters call home configuration mode.
Step 3
rename profile source-profile target-profile
Example:
Router(cfg-call-home)# rename profile2
testprofile
Renames an existing source file, where:
• source-profile—Specifies the existing name of the
profile.
• target-profile—Specifies a new name for the existing
profile.

Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Specifications

General

Brand	Cisco
Model	ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
Category	Network Router
Language	English