Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router User Manual

7-17
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 7 Configuring Call Home
How to Configure Call Home
To subscribe a destination profile to one or more alert groups, complete the following steps:
SUMMARY STEPS
1. configure terminal
2. call-home
3. alert-group {all | configuration | environment | inventory | syslog}
4. profile name
5. subscribe-to-alert-group all
6. subscribe-to-alert-group configuration [periodic {daily hh:mm | monthly date hh:mm | weekly
day hh:mm}]
7. subscribe-to-alert-group diagnostic [severity {catastrophic | critical | debugging | disaster |
fatal | major | minor | normal | notification | warning}]
8. subscribe-to-alert-group environment [severity {catastrophic | critical | debugging | disaster |
fatal | major | minor | normal | notification | warning}]
9. subscribe-to-alert-group inventory [periodic {daily hh:mm | monthly date hh:mm | weekly day
hh:mm}]
10. subscribe-to-alert-group syslog [severity {catastrophic | critical | debugging | disaster | fatal |
major | minor | normal | notification | warning}] [pattern string]
11. exit
DETAILED STEPS
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
call-home
Example:
Router(config)# call-home
Enters call home configuration mode.
Step 3
alert-group {all | configuration | environment |
inventory | syslog}
Example:
Router(cfg-call-home)# alert-group all
Enables the specified alert group. Use the all
keyword to enable all alert groups. By default, all
alert groups are enabled.
Step 4
profile name
Example:
Router(cfg-call-home)# profile profile1
Enters call home destination profile configuration
mode for the specified destination profile.

Cisco ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router Specifications

General

Brand	Cisco
Model	ASR1000-RP1 - ASR 1000 Series Route Processor 1 Router
Category	Network Router
Language	English