7-34
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Chapter 7 Configuring Call Home
Displaying Call Home Configuration Information
------------------------ ------- -------------------------------
configuration Enable configuration info
diagnostic Enable diagnostic info
environment Enable environmental info
inventory Enable inventory info
syslog Enable syslog info
Example: E-Mail Server Status Information
Router# show call-home mail-server status
Please wait. Checking for mail server status ...
Translating "smtp.example.com"
Mail-server[1]: Address: smtp.example.com Priority: 1 [Not Available]
Mail-server[2]: Address: 192.168.0.1 Priority: 2 [Not Available]
Example: Information About All Destination Profiles (Predefined and User-Defined)
Router# show call-home profile all
Profile Name: campus-noc
Profile status: ACTIVE
Preferred Message Format: long-text
Message Size Limit: 3145728 Bytes
Transport Method: email
Email address(es): username@example.com
HTTP address(es): Not yet set up
Alert-group Severity
------------------------ ------------
inventory normal
Syslog-Pattern Severity
------------------------ ------------
N/A N/A
Profile Name: CiscoTAC-1
Profile status: INACTIVE
Preferred Message Format: xml
Message Size Limit: 3145728 Bytes
Transport Method: email
Email address(es): callhome@cisco.com
HTTP address(es): https://tools.cisco.com/its/service/oddce/services/DDCEService
Periodic configuration info message is scheduled every 23 day of the month at 12:13
Periodic inventory info message is scheduled every 23 day of the month at 11:58
Alert-group Severity
------------------------ ------------
diagnostic minor
environment minor
inventory normal
Syslog-Pattern Severity
------------------------ ------------
.* major
Router#
Example: Information About a User-Defined Destination Profile
Router# show call-home profile campus-noc
To Next Page
Loading...
Need help?
General
