Contents
iv
Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide
OL-16506-10
Accessing the CLI from a Remote Console Using Telnet 2-3
Preparing to Connect to the Router Console Using Telnet 2-3
Using Telnet to Access a Console Interface 2-3
Accessing the CLI from a Remote Console Using a Modem 2-4
Using the Auxiliary Port 2-4
Using Keyboard Shortcuts 2-5
Using the History Buffer to Recall Commands 2-5
Understanding the Command Mode 2-6
Understanding the Diagnostic Mode 2-7
Getting Help 2-8
Finding Command Options 2-8
Using the no and default Forms of Commands 2-11
Saving Configuration Changes 2-12
Managing Configuration Files 2-12
Filtering the Output of the show and more Commands 2-13
Powering Off a Router 2-14
Finding Support Information for Platforms and Cisco Software Images 2-14
Using the Cisco Feature Navigator 2-14
Using the Software Advisor 2-15
Using the Software Release Notes 2-15
CHAPTER
3 Consolidated Packages and SubPackages Management 3-1
Running the Cisco ASR 1000 Series Routers: An Overview 3-1
Running the Cisco ASR 1000 Series Routers Using Individual and Optional SubPackages: An
Overview 3-2
Running the Cisco ASR 1000 Series Routers Using a Consolidated Package: An Overview 3-2
Running the Cisco ASR 1000 Series Routers: A Summary 3-3
Software File Management Using Command Sets 3-4
The request platform Command Set 3-4
The copy Command 3-5
The issu Command Set 3-5
Managing and Configuring the Router to Run Using Consolidated Packages and Individual
SubPackages 3-6
Quick Start Software Upgrade 3-6
Managing and Configuring a Router to Run Using a Consolidated Package 3-7
Managing and Configuring a Consolidated Package Using the copy Command 3-7
Managing and Configuring a Consolidated Package Using the request platform software package
install Command 3-8
To Next Page
Loading...
