Cisco ASR1002 - Page 11

11
Step 2 Insert the AWG #6 wire into the wire receptacle in the grounding lug.
Step 3 Use the manufacturer’s recommended crimping tool to carefully crimp the wire receptacle around the wire. This step is
required to ensure a proper mechanical connection.
Figure 7 shows how to attach a ground lug to the chassis ground connector.
Figure 7 Attaching a Grounding Lug to the Chassis Ground Connector
Step 4 Attach the grounding lug with the wire on the left to avoid having the grounding wire overlapping the power supply.
Step 5 Locate the chassis ground connector on the side of your chassis.
Figure 8 Attaching a Grounding Lug to the Chassis Ground Connector
1
Chassis ground connector holes
3
Ground screws
2
Grounding stud
4
Chassis ground lead wire
1
Chassis earth ground studs and lead wire
3
Earth ground connector on the chassis
2
Ground screws
4
Earth ground symbol
50536
1
2
3
4
280034
3
4
2
1