D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
64
Cisco TelePresence System Quick Set C20 and Profiles using C20 Administrator Guide
Network settings
Network [1..1] IPStack
Select which internet protocols the system will support.
NOTE: Restart the system after changing this setting.
Requires user role: ADMIN
Value space: <IPv4/IPv6>
IPv4: IP version 4 is used for the SIP and H323 calls.
IPv6: IP version 6 is used for the SIP and H323 calls.
Example:
Network 1 IPStack: IPv4
Network [1..1] Assignment
Define how the system will obtain its IPv4 address, subnet mask and gateway address. This
setting only applies to systems on IPv4 networks.
Requires user role: ADMIN
Value space: <Static/DHCP>
Static: The addresses must be configured manually using the Network IPv4 Address,
Network IPv4 Gateway and Network IPv4 SubnetMask settings (static addresses).
DHCP: The system addresses are automatically assigned by the DHCP server.
Example:
Network 1 Assignment: DHCP
Network [1..1] IPv4 Address
Enter the static IPv4 network address for the system. This setting is only applicable when
Network Assignment is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address.
Example:
Network 1 IPv4 Address: "192.0.2.0"
Network [1..1] IPv4 Gateway
Define the IPv4 network gateway. This setting is only applicable when the Network Assignment
is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: A valid IPv4 address.
Example:
Network 1 IPv4 Gateway: "192.0.2.0"
Network [1..1] IPv4 SubnetMask
Define the IPv4 network subnet mask. This setting is only applicable when the Network
Assignment is set to Static.
Requires user role: ADMIN
Value space: <S: 0, 64>
Format: The valid IPv4 address format.
Example:
Network 1 IPv4 SubnetMask: "255.255.255.0"
To Next Page
Loading...
Need help?
General
