EasyManuals Logo
Home>Cisco>Conference System>C20 TelePresence System

Cisco C20 TelePresence System User Manual

Cisco C20 TelePresence System
127 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #74 background imageLoading...
Page #74 background image
D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
74
Cisco TelePresence System Quick Set C20 and Profiles using C20 Administrator Guide
NetworkServices SNMP SystemContact
Enter the name of the Network Services SNMP System Contact.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example:
NetworkServices SNMP SystemContact: ""
NetworkServices SNMP SystemLocation
Enter the name of the Network Services SNMP System Location.
Requires user role: ADMIN
Value space: <S: 0, 50>
Format: String with a maximum of 50 characters.
Example:
NetworkServices SNMP SystemLocation: ""
NetworkServices SSH Mode
SSH (or Secure Shell) protocol can provide secure encrypted communication between the
codec and your local computer.
Requires user role: ADMIN
Value space: <Off/On>
Off: The SSH protocol is disabled.
On: The SSH protocol is enabled.
Example:
NetworkServices SSH Mode: On
NetworkServices SSH AllowPublicKey
Secure Shell (SSH) public key authentication can be used to access the codec.
Requires user role: ADMIN
Value space: <Off/On>
Off: The SSH public key is not allowed.
On: The SSH public key is allowed.
Example:
NetworkServices SSH AllowPublicKey: On
NetworkServices Telnet Mode
Telnet is a network protocol used on the Internet or Local Area Network (LAN) connections.
Requires user role: ADMIN
Value space: <Off/On>
Off: The Telnet protocol is disabled. This is the factory setting.
On: The Telnet protocol is enabled.
Example:
NetworkServices Telnet Mode: Off
NetworkServices CTMS Mode
This setting determines whether or not to allow multiparty conferences controlled by a Cisco
TelePresence Multipoint Switch (CTMS).
Video systems running software TC5.0 or later are able to initiate or join non-encrypted
multiparty conferences controlled by CTMS version 1.8 or later. Encrypted conferences are
supported as from software versions TC6.0 and CTMS 1.9.1. Encryption is addressed in the
NetworkServices CTMS Encryption setting.
Requires user role: ADMIN
Value space: <Off/On>
Off: Mulitparty conferencing via CTMS is prohibited.
On: Mulitparty conferencing via CTMS is allowed.
Example:
NetworkServices CTMS Mode: On
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco C20 TelePresence System and is the answer not in the manual?

Cisco C20 TelePresence System Specifications

General IconGeneral
BrandCisco
ModelC20 TelePresence System
CategoryConference System
LanguageEnglish

Related product manuals