Cisco C20 TelePresence System User Manual

D14637.10 Profile C20 and Quick Set C20 Administrator Guide TC6.1, APRIL 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
82
Cisco TelePresence System Quick Set C20 and Profiles using C20 Administrator Guide
SerialPort settings
SerialPort Mode
Enable/disable the serial port (connection via Camera port with Y-cable).
Requires user role: ADMIN
Value space: <Off/On>
Off: Disable the serial port.
On: Enable the serial port.
Example:
SerialPort Mode: On
SerialPort BaudRate
Specify the baud rate (data transmission rate, bits per second) for the serial port. The default
value is 38400.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1; Flow
control: None.
Requires user role: ADMIN
Value space: <9600/19200/38400/57600/115200>
Range: Select a baud rate from the baud rates listed (bps).
Example:
SerialPort BaudRate: 38400
SerialPort LoginRequired
Determine if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Value space: <Off/On>
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
Example:
SerialPort LoginRequired: On
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
System settings

Cisco C20 TelePresence System Specifications

General

Brand	Cisco
Model	C20 TelePresence System
Category	Conference System
Language	English