2-16
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
CLS_ACC Messages
Error Message CLS_ACC-5-CLRCFG: User cleared switch configurations under recovery
mode
Explanation The switch resets to the default configuration in recovery mode.
Recommended Action No action is required.
Error Message CLS_ACC-5-RSTIMG: User reset switch image to factory default image
under recovery mode
Explanation In recovery mode, the switch image resets to the default image.
Recommended Action No action is required.
Error Message CLS_ACC-7-ACC_INTF: Selected management interface: [chars] interface
number: [dec]
Explanation An interface has been selected for Express Setup. [chars] is the name of the interface,
and [dec] is the number of the interface.
Recommended Action No action is required.
Error Message CLS_ACC-7-ACC_VLAN: Selected vlan [dec] for consoleless access
Explanation The switch assigned a VLAN to the management interface for consoleless access. [dec]
is the VLAN ID.
Recommended Action No action is required.
Error Message CLS_ACC-7-CONFIG: Save access intf config: if: [chars], port num:
[dec], vlan [dec], admin-down?:[dec]
Explanation The switch has saved the interface configuration. After the switch exits Express Setup
mode and the management interface is configured, the saved configuration takes effect. [chars] is
the name of the mode. The first [dec] is the port number, the second [dec] is the VLAN ID, and the
third [dec] is the port status.
Recommended Action No action is required.
Error Message CLS_ACC-7-CONFIG_SUCCESS: [chars]
Explanation The management interface has been configured, or its original configuration has been
restored. [chars] is the name of the configuration file.
Recommended Action No action is required.