2-60
Catalyst 3750-X, 3750-E, 3560-X, and 3560-E Switch System Message Guide
OL-9772-05
Chapter 2 Message and Recovery Procedures
PLATFORM_ENV Messages
Error Message PLATFORM_ENV-3-RPS_FAULTY_BACKUP: [chars].
Explanation The RPS 2300 is continuing to back up the switch even though the command on the
switch instructs the RPS 2300 to no longer supply power to the switch. [chars] is the error message.
Recommended Action This problem could be transient. If the message appears again, disconnect and
then reconnect the switch.
Error Message PLATFORM_ENV-3-RPS_POST_FAILED: [chars].
Explanation An RPS 2300 power-on self-test (POST) failure is detected. [chars] is the error message.
Recommended Action No action is required.
Error Message PLATFORM_ENV-5-RPS_THERMAL_NORMAL: RPS temperature is within the
acceptable limit.
Explanation The temperature sensor value in the RPS 2300 is within the normal limit.
Recommended Action No action is required.
Error Message PLATFORM_ENV-6-FRU_PS_OIR: FRU Power Supply [chars].
Explanation A power supply is inserted or removed. [chars] is the power supply status that can be
either inserted or removed.
Recommended Action No action is required.
Error Message PLATFORM_ENV-6-RPS: Redundant Power Supply (RPS) [chars].
Explanation The RPS 2300 state is changed. [chars] is the state (added or removed).
Recommended Action No action is required.
Error Message PLATFORM_ENV-6-RPS_INFO: Redundant Power Supply [chars].
Explanation This message has information about the RPS 2300. [chars] is the information (inserted,
is in active mode, or removed).
Recommended Action No action is required.
Error Message PLATFORM_ENV-6-RPS_PS_INSERTED: [chars].
Explanation A power supply is inserted in the RPS 2300. [chars] is the system message.
Recommended Action No action is required.