Cisco Catalyst 3850 Guide

Initial Switch Configuration
Assign Initial Management Information
25
Best Practice User Guide for the Catalyst 3850 and Catalyst 3650 Switch Series
Note The Shortest Path Tree (SPT) and ping command used in this example require that the upstream layer
device (switch or router) to be configured to operate in a production network, and without any additional
configuration changes being required.
vlan 100
name switch_mgmt
exit
vlan 999
name dummy
exit
!
! The next step assumes the uplink interface is GigabitEthernet 1/1/1, but
! your uplink interface may be different.
!
interface GigabitEthernet 1/1/1
Switchport mode trunk
Switchport trunk native vlan 999

Cisco Catalyst 3850 Specifications

General

Stacking Bandwidth	480 Gbps
Max Stacking Units	9
Form Factor	Rack-mountable
RAM	4 GB
Flash Memory	4 GB
Operating System	Cisco IOS XE
Model	Catalyst 3850
Ports	24 or 48 Gigabit Ethernet ports
Uplink Interfaces	4 x 1GE, 2 x 10GE, or 4 x 10GE
Power Supply	Redundant power supplies
Dimensions	44.5 x 44.8 x 4.45 cm
Weight	7.6 kg
Features	IPv6
Power over Ethernet (PoE)	PoE, PoE+, UPOE (varies by model)
Operating Temperature	0 to 40°C