Time and DateVerified ByActivityTask No.
Cable and interface equipment
evaluation:
•
Cable type
•
Connector type
•
Cable distance limitations
•
Interface equipment
(transceivers)
5
EMI evaluation:
•
Distance limitations for
signaling
•
Site wiring
•
RFI levels
6
For power receptacles (depends on power supply), verify that each power supply installed in the chassis
has a dedicated AC source or DC source circuit.
Note
For UPS for power failures, refer to the power supply’s kVA rating as a sizing criteria in determining the
output required by the UPS.
Note
Catalyst 6880-X Switch Hardware Installation Guide
OL-30827-02 31
Preparing for Installation
Site Preparation Checklist
To Next Page
Loading...
