Step 3
Use the bale-release latch side of the tool to lift the bale up, and remove the SFP or SFP+ module.
Figure 33: Removing the SFP Module from the Port Card
Step 4
Grasp the SFP or SFP+ transceiver module, and carefully remove it from the slot.
Step 5
Place the SFP or SFP+ transceiver module in an antistatic bag or other protective environment.
Catalyst 6880-X Switch Hardware Installation Guide
OL-30827-02 69
Installing the Modular Port Card
Removing SFP or SFP+ Modules from the Modular Port Card
To Next Page
Loading...
