Name: Cisco Catalyst 9800-L Series
Brand: Cisco
Rating: 4 (1 reviews)

To Next Page

To Previous Page

• Make sure that the controller is within 328 ft. (100 m) of equipment connected to the 10/100/1000 Mbps

Ethernet ports.

• Make sure that the power supply adapter and the power cord can reach a 100 to 240 VAC grounded

electrical outlet.

• Make sure that at least two rack-units space is available for rack tray kit, if you are installing the controller

in a rack.

This equipment must be grounded. Never defeat the ground conductor or operate the equipment in the absence

of a suitably installed ground conductor. Contact the appropriate electrical inspection authority or an electrician

if you are uncertain that suitable grounding is available. Statement 1024.

Warning

This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that the

protective device is rated not greater than 20A. Statement 1005.

Warning

Cisco Catalyst 9800-L Wireless Controller Hardware Installation Guide

Preparing Your Site for Installation

Choosing a Physical Location

Questions and Answers:

Need help?

Do you have a question about the Cisco Catalyst 9800-L Series and is the answer not in the manual?

Cisco Catalyst 9800-L Series Specifications

General