Cisco Catalyst 9800-L Series User Manual

SpecificationDescription
5% to 95% RH non-condensingOperating Humidity
0 to 10,000 ft (3048m)Operational Altitude
Power Specifications
Table 13: AC Power Supply Specifications
SpecificationDescription
100 to 240 VACAC input voltage
50 to 60 HzFrequency
110 W
This is calculated as
follows:
• 110W@12V
Maximum output
power
C9800-AC-110WAdapter
Table 14: Heat Dissipation and Power Consumption Specifications
SpecificationDescription
48 WMaximum heat dissipation (with 2-ports .3at)
98 WMaximum power consumption (with 2-ports .3at)
Cisco Catalyst 9800-L Wireless Controller Hardware Installation Guide
50
Controller Specifications
Power Specifications

Cisco Catalyst 9800-L Series Specifications

General

Model	Cisco Catalyst 9800-L Series
Category	Controller
Throughput	5 Gbps
Redundancy	Yes
Form Factor	Rack-mountable
Redundant Power Supply	Optional
Power Supply	Internal
Operating System	Cisco IOS XE
Maximum Clients	2000
Management	Cisco DNA Center, CLI, WebUI
Wireless Standard	802.11ax
Management Port	RJ-45
Operating Temperature	0 to 40°C
Input Voltage	100-240 VAC, 50/60 Hz
Ports	4 x 10G SFP+