equipment in an environment as free from dust and foreign conductive material (such as metal flakes
from construction activities) as is possible.
Shipping Box Contents
The shipping box contains the model of the switch you ordered and other components needed for installation.
Some components are optional, depending on your order.
Verify that you have received these items. If any item is missing or damaged, contact your Cisco representative
or reseller for instructions. Verify that you have received these items. If any item is missing or damaged,
contact your Cisco representative or reseller for instructions.
Note
Figure 8: Components delivered in the shipping box
Eight number-8 Phillips flat-head screws9Cisco Catalyst 9300 Series switch with
optional network module
Footnote.
(power
supply and fan modules not shown)
1
Cable guide10AC power cord2
M4.0 x 20mm Phillips pan-head screw11Product documentation and compliance
document
3
(Optional) RJ-45 console cable
Footnote.
12Four rubber mounting feet4
(Optional) USB console cable
Footnote.
13Ground lug screw and ring terminal5
(Optional) StackWise cable (0.5-meter,
1-meter, or 3-meter)
Footnote.
14Two 19-inch mounting brackets6
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
24
Switch Installation
Shipping Box Contents
To Next Page
Loading...