Cisco Catalyst C9300-48UXM User Manual

• 1 GE/10 GE/25 GE SFP28
• 10 M/100 M/1000 M PoE+
• 10 M/100 M/1000 M Cisco UPOE/UPOE+
• Multigigabit Ethernet 100 M/1 GE/2.5 GE/5 GE/10 GE Cisco UPOE
• Uplink network module slots
• USB Type A connector
• USB mini-Type B (console) port
• LEDs
• Mode button
• Beacon LED (UID button)
All the switch models have similar components. See the following illustration for example.
The Catalyst 9300 switches might have slight cosmetic differences on the bezels.
Note
Figure 1: C9300-48P Switch Front Panel
USB Type A storage port4Beacon LED (UID button)1
10 M/100 M/1000 M PoE+ ports5Status LEDs2
Network module slots6USB mini-Type B (console) port3
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
5
Product Overview
Front Panel Components

Cisco Catalyst C9300-48UXM Specifications

General

Model	C9300-48UXM
Product Type	Switch
Form Factor	Rack-mountable
PoE+	Yes
Stacking Bandwidth	480 Gbps
Flash Memory	16 GB
MAC Address Table Size	32, 000 entries
Input Voltage	100-240 VAC
Uplink Interfaces	4 x 10G SFP+
Weight	18.5 lbs
Jumbo Frame Support	Yes
VLANs	4096
Power over Ethernet (PoE)	Yes
Stacking	Yes
Operating Temperature	0 to 45°C
Operating Humidity	10 - 95% (non-condensing)
Dimensions	44.5 x 44.5 x 4.4 cm