Cisco Catalyst C9300-48UXM User Manual

Figure 48: 715W DC Power Supply (PWR-C1-715WDC)
Input power terminal
(positive polarity)
6715 W DC power supply
module
1
Input power terminal
(negative polarity)
7DC OK LED2
Grounding terminal8PS OK LED3
Terminal block safety
cover
9Release latch4
--Extraction handle5
If no power supply is installed in a power supply slot, install a power supply slot cover.
Cisco Catalyst 9300 Series Switches Hardware Installation Guide
85
Installing a Power Supply
Power Supply Modules Overview

Cisco Catalyst C9300-48UXM Specifications

General

Model	C9300-48UXM
Product Type	Switch
Form Factor	Rack-mountable
PoE+	Yes
Stacking Bandwidth	480 Gbps
Flash Memory	16 GB
MAC Address Table Size	32, 000 entries
Input Voltage	100-240 VAC
Uplink Interfaces	4 x 10G SFP+
Weight	18.5 lbs
Jumbo Frame Support	Yes
VLANs	4096
Power over Ethernet (PoE)	Yes
Stacking	Yes
Operating Temperature	0 to 45°C
Operating Humidity	10 - 95% (non-condensing)
Dimensions	44.5 x 44.5 x 4.4 cm