EasyManuals Logo

Cisco CP-7942G User Manual

Cisco CP-7942G
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #128 background imageLoading...
Page #128 background image
7-4
Cisco Unified IP Phone 7962G and 7942G Administration Guide for Cisco Unified Communications Manager 7.0
OL-15483-01
Chapter 7 Viewing Model Information, Status, and Statistics on the Cisco Unified IP Phone
Status Menu
CFG TFTP Size Error The configuration file is too large for file
system on the phone.
Power cycle the phone.
Checksum Error Downloaded software file is corrupted. Obtain a new copy of the phone firmware and place it
in the TFTPPath directory. You should only copy files
into this directory when the TFTP server software is
shut down, otherwise the files may be corrupted.
CTL Installed A certificate trust list (CTL) file is
installed in the phone.
None. This message is informational only.
For more information about the CTL file, refer to
Cisco Unified Communications Manager Security
Guide.
CTL update failed The phone could not update its
certificate trust list (CTL) file.
Problem with the CTL file on the TFTP server.
For more information, refer to Cisco Unified
Communications Manager Security Guide.
DHCP timeout DHCP server did not respond. Network is busy—The errors should resolve
themselves when the network load reduces.
No network connectivity between the DHCP
server and the phone—Verify the network
connections.
DHCP server is down—Check configuration of
DHCP server.
Errors persist—Consider assigning a static IP
address. See the
“Network Configuration Menu”
section on page 4-5 for details on assigning a
static IP address.
Dialplan Parsing Error
(SIP phones only)
The phone could not properly parse the
dialplan XML file.
Problem with the TFTP downloaded dialplan XML
file.
Disabled 802.1X Authentication is disabled on the
phone.
You can enable 802.1X using the Settings > Security
Configuration > 802.1X Authentication option on
the phone. For more information, see the
“802.1X
Authentication and Status” section on page 4-30.
DNS timeout DNS server did not respond. Network is busy—The errors should resolve
themselves when the network load reduces.
No network connectivity between the DNS server
and the phone—Verify the network connections.
DNS server is down—Check configuration of
DNS server.
DNS unknown host DNS could not resolve the name of the
TFTP server or Cisco Unified
Communications Manager.
Verify that the host names of the TFTP server or
Cisco Unified
Communications Manager are
configured properly in DNS.
Consider using IP addresses rather than host
names.
Table 7-2 Status Messages on the Cisco Unified IP Phone (continued)
Message Description Possible Explanation and Action

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco CP-7942G and is the answer not in the manual?

Cisco CP-7942G Specifications

General IconGeneral
BrandCisco
ModelCP-7942G
CategoryIP Phone
LanguageEnglish

Related product manuals