Index
IN-3
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
OL-17439-01
interface specifications 3-27
LEDs 3-26, 3-27
optical transceiver modules 3-28
overview 3-26
OC-192c/STM-64 POS/RPR XFP SPA
bandwidth
3-22
cables 3-24, 3-25
connectors 3-24
faceplate (figure) 3-23
interface specifications 3-24
LEDs
(figure)
3-23
descriptions (table) 3-23
optical transceiver modules 3-24
overview 3-22
OC-3c/STM-1 POS SPA
bandwidth
3-10, 3-20
cables 3-6, 3-11, 3-12
connectors 3-11
faceplate (figure) 3-10
interface specifications 3-11
LEDs 3-10, 3-11
optical transceiver modules 3-11
overview 3-7
OC-48c/STM-16 POS SPA
cables and connectors
3-21
interface specifications 3-20
LEDs 3-19
overview 3-19
OIR
for SIPs
1-1
for SPAs 1-3, 6-6
online insertion and removal
see OIR
optical transceivers
for 1-Port OC-192c/STM-64 POS/RPR VSR Optics
SPA
3-28
for 8-Port OC-3c/STM-1 and OC-12c/STM-4 POS
SPA
3-15
for OC-3c/STM-1 POS SPA 3-11
for OC-48c/STM-16 POS/RPR SPA 3-21
oversubscription of SIP 3-2, 7-2
P
packing SIP 7-4
packing SPA 7-4
physical layer interface module
see PLIM
PLIM
2-1, 2-2, 2-3, 5-2
impedance carrier 5-2
R
rack number 2-6
RFC 1662, PPP in HDLC-like Framing 3-15, 3-24, 3-27
RFC 2427, Multiprotocol Interconnect over Frame
Relay
3-15
RFC 2615, PPP over SONET/SDH 3-11, 3-15, 3-24, 3-27
RPR
LEDs
3-27
S
safety
laser
4-3
LED 4-4
warnings 4-1
safety guidelines 4-1
SFP-GE-L 1-5, 3-31, 3-34, 3-37, 3-38
SFP-GE-S 1-5, 3-30, 3-34, 3-37, 3-38
SFP-GE-Z 1-5, 3-31, 3-34, 3-35, 3-37, 3-38
SFP module 3-29, 3-33, 3-37
cabling 3-31, 3-35, 3-39
SFP-OC12-IR1 1-5, 3-15
SFP-OC12-LR1 1-5, 3-15
SFP-OC12-MM 1-5, 3-15
SFP-OC12-SR 1-5, 3-15
To Next Page
Loading...
