Cisco CRS-1 - Carrier Routing System Router

7-4
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
OL-17439-01
Chapter 7 Troubleshooting the Installation
Packing a SIP for Shipment
Packing a SIP for Shipment
Packing a SPA for Shipment
This section provides step-by-step instructions for packing a SPA and the cable-management brackets
for shipment. Before beginning this procedure, you should have the following original Cisco Systems
packaging materials:
• Thermoform container (transparent plastic-molded clamshell)
• Carton
1
2 3
4 5 6
7 8 9
138716