Cisco CRS-1 - Carrier Routing System Router

IN-1
Cisco CRS-1 Carrier Routing System SIP and SPA Hardware Installation Guide
OL-17439-01
INDEX
Numerics
10-Port Gigabit Ethernet SPA 3-36
cables and connectors 3-37
LEDs 3-36
overview 3-36
SFP module 3-37
1-Port 10-Gigabit Ethernet SPA 3-39
cables and connectors 3-40
LEDs 3-40
overview 3-39
XFP module 3-40, 3-41
1-Port and 3-Port Clear Channel OC-3 ATM SPA 3-4
Cables and Connectors 3-5
Interface Specifications 3-5
LEDs 3-4
1-Port Clear Channel OC-12 ATM SPA 3-7
Cables and Connectors 3-8
Interface Specifications 3-8
LEDs 3-7
1-Port OC-12c/STM-4c ATM SPA
Cables and Connectors
3-8
Interface Specifications 3-8
LEDs 3-7
2-Port and 4-Port Channelized T3 Serial SPA
Cables and Connectors
3-44
Interface Specifications 3-44
LEDs 3-43
2-Port and 4-Port Clear Channel T3/E3 SPA
overview
3-43
2-Port and 4-Port OC-3c/STM-1 ATM SPA
Cables and Connectors
3-5
Interface Specifications 3-5
LEDs 3-4
3-Port Clear Channel OC-3 ATM SPA 3-4
5-Port Gigabit Ethernet SPA 3-28
cables and connectors 3-29
LEDs 3-29
overview 3-28
SFP module 3-29
8-Port Gigabit Ethernet SPA 3-32
cables and connectors 3-33
LEDs 3-33
overview 3-32
SFP module 3-33
B
bandwidth
capacity
3-3
limits for SIP 3-2
oversubscription 3-2
blank filler plate, SPA 1-1, 6-9
C
cable-management brackets for SPA 6-9
cables
LC-type
3-16
(figure) 3-12, 3-25, 3-41
MTP type (figure) 3-28
Class 1 Laser, warning 4-3
Class 1 LED, warning 4-4
CRS-1 line card chassis 2-3
CRS-1 SIP-800 2-1