Cisco CRS Command Reference Guide

Physical interface instance. Naming
notation is rack/slot/module/port
and a slash between values is
required as part of the notation.
• rack—Chassis number of the
rack.
• slot—Physical slot number of
the line card.
• module—Module number. A
physical layer interface
module (PLIM) is always 0.
• port—Physical port number
of the interface.
In references to a
Management Ethernet
interface located on a
route processor card, the
physical slot number is
alphanumeric (RP0 or
RP1) and the module is
CPU0.
Note
Example: interface
MgmtEth0/RP1/CPU0/0.
For more information about the
syntax for the router, use the
question mark (?) online help
function.
interface-path-id
(Optional) Displays per class
statistics on inbound traffic for the
specified policy map and interface.
input
(Optional) Displays per class
statistics on outbound traffic for the
specified policy map and interface.
output
(Optional) Specifies the bundle
member’s interface.
member
Command Default
No default behavior or values
Command Modes
EXEC
Cisco IOS XR Modular Quality of Service Command Reference for the Cisco CRS Router, Release 4.0
126 OL-23235-03
Quality of Service Commands on the Cisco IOS XR Software
show policy-map interface

Cisco CRS Specifications

General

Operating System	Cisco IOS XR
Product Type	Core Router
Form Factor	Modular Chassis
Dimensions	Varies by chassis type
Weight	Varies by chassis type
Architecture	Distributed
Switch Fabric	Multi-stage
Interface Support	Ethernet, SONET/SDH, OTN
Interfaces/Ports	Varies by line card
Port Density	Varies by line card
Routing Protocol	BGP, IS-IS, OSPF, MPLS
Management	CLI, SNMP
Power Supply	Redundant, hot-swappable
Cooling	Redundant, Hot-swappable Fan Trays
Supported Protocols	IPv4, IPv6, MPLS
Management Interfaces	Ethernet, console
Security Features	ACLs