Cisco DX80 - Configure Speed Dial Numbers

35
D1510401 User Guide
Cisco Collaborate Desk DX80
Produced: April 2014, All contents © 2014
Cisco Systems, Inc. All rights reserved.
EFT Draft 1—Cisco Condential—Do Not Distribute
Tap Calls to invoke the display shown here
and then tap More (
...
), followed by Add a
speed dial in the drop-down menu.
Tap More (
...
) again.
Once located, specify the Speed dial code to
be associated with this person. In this example
1 is used as speed dial code. Tap OK to leave
menu putting changes into eect.
You will now be prompted to log into the
system using you username and password.
Tap Add a speed dial in the drop-down
menu.
The speed dial allocation and the
corresponding code is indicated as shown.
Authentication will then take place.
Locate whom to allocate to a speed dial.
Allocating Numbers to Speed Dial
Contacts
Speed Dial is a convenient shortcut
to contacts that you use often. You
allocate a speed dial code (typically
a number) to the entry and use that
to call that person.
How to utilize already allocated
speed dial settings is shown in the
chapter Calling Tasks.
About Speed Dial