Cisco Firepower 1010 Hardware Installation Guide

• See the fips enable command in the Cisco ASA Series Command Reference, A-H Commands for the ASA
procedure to enable FIPS mode.
What to do next
See the Cisco Firepower 1010 Getting Started Guide for further configuration information.
Cisco Firepower 1010 Hardware Installation Guide
45
Installation, Maintenance, and Upgrade
Install the FIPS Opacity Shield

Cisco Firepower 1010 Specifications

General

VPN Throughput	500 Mbps
Concurrent Sessions	100, 000
Maximum Concurrent Sessions	200, 000
Ports	8 x 1 GE
Humidity	10% to 90% non-condensing
Form Factor	Desktop
Flash Memory	8 GB
Interfaces	8 x RJ-45
Power Supply	Internal
Dimensions (H x W x D)	4.44 x 21.59 x 17.27 cm
Operating Temperature	32°F to 104°F (0°C to 40°C)
Storage Temperature	-20 to 70°C
Memory	4 GB