Cisco Firepower 1100 Getting Started Guide

Step 6 On the Translation page, configure the following options:
• Original Source—Click Add ( ) to add a network object for all IPv4 traffic (0.0.0.0/0).
You cannot use the system-defined any-ipv4 object, because Auto NAT rules add NAT as part
of the object definition, and you cannot edit system-defined objects.
Note
• Translated Source—Choose Destination Interface IP.
Cisco Firepower 1100 Getting Started Guide
143
Threat Defense Deployment with CDO
Configure NAT

Cisco Firepower 1100 Specifications

General

Brand	Cisco
Model	Firepower 1100
Category	Firewall
Language	English