Cisco Firepower 1100

• L-FPR1120T-TMC=
• L-FPR1140T-TMC=
• L-FPR1150T-TMC=
When you add one of the above PIDs to your order, you can then choose a term-based subscription
corresponding with one of the following PIDs:
• L-FPR1120T-TMC-1Y
• L-FPR1120T-TMC-3Y
• L-FPR1120T-TMC-5Y
• L-FPR1140T-TMC-1Y
• L-FPR1140T-TMC-3Y
• L-FPR1140T-TMC-5Y
• L-FPR1150T-TMC-1Y
• L-FPR1150T-TMC-3Y
• L-FPR1150T-TMC-5Y
• RA VPN—See the Cisco AnyConnect Ordering Guide.
Step 2 If you have not already done so, register the management center with the Smart Licensing server.
Registering requires you to generate a registration token in the Smart Software Manager. See the Cisco Secure
Firewall Management Center Administration Guide for detailed instructions.
Register the Threat Defense with the Management Center
Register the threat defense to the management center manually using the device IP address or hostname.
Before you begin
• Gather the following information that you set in the threat defense initial configuration:
• The threat defense management IP address or hostname, and NAT ID
• The management center registration key
Procedure
Step 1 In the management center, choose Devices > Device Management.
Step 2 From the Add drop-down list, choose Add Device.
Cisco Firepower 1100 Getting Started Guide
24
Threat Defense Deployment with the Management Center
Register the Threat Defense with the Management Center