Cisco Firepower 1100

• Configure the Firewall in the Device Manager, on page 101
• Access the Threat Defense and FXOS CLI, on page 104
• Power Off the Firewall, on page 106
• What's Next?, on page 107
End-to-End Procedure
See the following tasks to deploy the threat defense with the device manager on your chassis.
Install the firewall. See the hardware installation guide.Pre-Configuration
Review the Network Deployment and Default Configuration, on page 85.Pre-Configuration
Cisco Firepower 1100 Getting Started Guide
84
Threat Defense Deployment with the Device Manager
End-to-End Procedure