Cisco Firepower 1100

(Optional) Check the Software and Install a New Version, on page 115.CLI
(CDO admin)
Log Into CDO, on page 117.CDO
(CDO admin)
Provide the Firewall Serial Number to the Central Administrator, on page 121.Branch Office Tasks
(Branch admin)
Install the firewall. See the hardware installation guide.Branch Office Tasks
(Branch admin)
Cable the Firewall, on page 121.Branch Office Tasks
(Branch admin)
Power On the Firewall, on page 122.Branch Office Tasks
(Branch admin)
Onboard a Device with Low-Touch Provisioning, on page 124.CDO
(CDO admin)
Configure a Basic Security Policy, on page 137.CDO
(CDO admin)
End-to-End Procedure: Onboarding Wizard
See the following tasks to onboard the threat defense to CDO using the onboarding wizard.
Cisco Firepower 1100 Getting Started Guide
112
Threat Defense Deployment with CDO
End-to-End Procedure: Onboarding Wizard