Cisco Firepower 1100

Figure 14: End-to-End Procedure: Manual Provisioning
• (Optional) Check the Software and Install a New Version, on page 45
• Pre-Configuration Using the Device Manager, on page 47
• Pre-Configuration Using the CLI, on page 51
CLI or Device
Manager
(Central admin)
Install the firewall. See the hardware installation guide.Physical Setup
(Branch admin)
Cable the Firewall, on page 57.Physical Setup
(Branch admin)
Cisco Firepower 1100 Getting Started Guide
44
Threat Defense Deployment with a Remote Management Center
End-to-End Procedure: Manual Provisioning