Environmental rating
The unit is certified for outdoor usage, equipped with vibration-proof
connectors, and designed for fast installation and enhanced reliability in
harsh environments.
Staging hardware
A staging kit that allows easy installation of the unit on walls and utility
poles is supplied as part of the complete package.
Product specifications
For detailed product specifications, refer to the product data sheet for the
Cisco FM1200 Volo.
Transceiver and gateway unit power consumption
In service, Cisco transceiver units and gateway units consume
electrical power at the rates given in the table below.
IMPORTANT
In service, transceiver and gateway units will consume power
at various levels between the quoted lower limit and upper
limit, depending on data traffic load, signal strength,
environmental conditions such as line-of-sight and atmospheric
moisture, and other factors.
Note that the power consumption of transceiver units tends to
be affected in inverse proportion to the unit temperature (in
other words, power consumption tends to rise when the
temperature of the unit falls, and the other way around).
Table 1. Power consumption figures (transceiver units)
Unit series Minimum power
consumption
Nominal power
consumption
(typical conditions)
Maximum power
consumption
(realistic system-
design
assumption)
FM Ponte kit
(Model FM1200V-
HW)
4 Watts 6 to 7 Watts 10 Watts
FM1200 Volo
(Model FM1200V-
HW)
4 Watts 6 to 7 Watts 10 Watts
FM1300 Otto 8 Watts 10 to 12 Watts 15 Watts
FM3200-series
(Model FM3200)
4 Watts 6 to 7 Watts 10 Watts
Getting Started
© 2021 Cisco and/or its affiliates. All rights reserved. Page 13 of 175
To Next Page
Loading...
