Cisco FM1200 - Switching between Offline and Online Modes

7.3. Switching between offline and online modes
The
Configurator interface may not be in the needed mode when you log
in. To switch between Offline and Online modes, do the steps that follow:
1. Log in to the Configurator interface as shown in “Accessing
the Cisco FM1200 Volo for device configuration” (page 47).
• The Configurator landing page will be shown (Figure 21
(page 57)).
Device configuration using the configurator interface
© 2021 Cisco and/or its affiliates. All rights reserved. Page 56 of 175