NOTE
As of October 2018, the most current firmware
versions are as follows:
• FM10000and1.2.1 (FM1000 Gateway
Gateway gateways)
• 7.5.1 (FM FM1200 Volo)
• 8.2.1 (All FM x200 variants)
• 9.0.1 (All FM x500 variants)
Connect a computer to the Cisco device.2.
Launch the offline Configurator interface.3.
4. Switch to Online Cloud-Managed mode as shown in the
Switching between offline and online modes section of your
device's Installation and Configuration manual.
5. Adjust the device configuration as needed using the Cisco
Partners Portal.
Troubleshooting
© 2021 Cisco and/or its affiliates. All rights reserved. Page 157 of 175
To Next Page
Loading...
