Cisco IP DECT 6825 Hardware Installation

• Determine that the base stations are placed so that handsets can communicate. Make sure that the
coverage is optimal for your users.
With the Cisco IP DECT 210 Multi-Cell Base Station, you can add additional base stations to
improve coverage.
Related Topics
Mount the Base Station on the Wall, on page 10
Mount the Base Station on the Ceiling, on page 6
Single Cell and Multicell Networks
Based on the information collected in Installation Requirements, on page 1, you set up either a single cell
system or a multicell system.
A single cell system consists of one base station with up to 30 handsets. The following diagram shows a single
cell network.
Figure 1: Single Cell Network
A multicell system consists of several base stations with each handling up to 30 handsets. The following
diagram shows a multicell network with 3 base stations.
Hardware Installation
3
Hardware Installation
Single Cell and Multicell Networks

Cisco IP DECT 6825 Specifications

General

Brand	Cisco
Model	IP DECT 6825
Category	IP Phone
Language	English