Cisco IR829 - Page 4

Contents
2
Cisco IR829 Integrated Services Router Hardware Installation Guide
Connecting to DC Power 3-3
Plugs and Pin-Outs 3-4
Constructing a Power cable 3-4
Wiring the DC Power 3-5
Verifying Connections 3-6
CHAPTER 4 Initial Configuration 4-1
Setup Command Facility 4-1
Verifying the Initial Configuration 4-4
Where To Go From Here 4-4
800 Series Documentation 4-4
Cisco IR829 Differences 4-5
LEDs 4-5
Software Bundle Installation 4-6
CHAPTER 5 Guest Operating System (Guest OS) Installation and Configuration 5-1
Guest Operating System Overview 5-1
Prerequisites 5-2
Guidelines and Limitations 5-2
Default Settings 5-2
Installation and Upgrade 5-2
Configuring Cisco IOS 5-3
Configuring the IR829 Ethernet Interface 5-3
IPv6 Gigabit Ethernet 5-3
Enabling IPv4 Gigabit Ethernet 5-4
Configuring DHCP Pool 5-4
Configuring Guest OS Interface on Cisco IOS 5-5
Enabling Guest OS Console 5-6
Configuring Guest OS 5-6
Starting Guest OS 5-6
Accessing Guest OS Console 5-6
Setting the Root Password 5-7
Enabling Remote SSH Access 5-7
Configuring NAT 5-8
Troubleshooting 5-9
Checking Connectivity 5-9
Related Documentation 5-9