Cisco ISR - Page 176

Index
IN-2
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
commands
accounting 3
antenna 22
authentication client 3
beacon dtim-period 27
beacon period 27
bridge-group 25
broadcast-key 14
countermeasure tkip hold-time 16
dot11 aaa mac-authen filter-cache 14
dot11 extension aironet 23
dot11 holdoff-time 15
dot11 interface-number carrier busy 29
dot1x client-timeout 15
dot1x reauth-period 15
encapsulation dot1q 6
encryption 4
fragment-threshold 28
guest-mode 4
infrastructure-client 25
infrastructure-ssid 4
interface dot11radio 1, 2
packet retries 27
payload-encapsulation 24
power client 14
rts retries 27
rts threshold 27
show dot11 associations 5
slot-time-short 28
speed 11
ssid 3, 9, 5
switchport protected 26
vlan 4, 5
world-mode 21
wpa-psk 13
commands station role 3
Complementary Code Keying (CCK)
See CCK
countermeasure tkip hold-time command 16
CSID format, selecting 13
D
Data Beacon Rate 26
data rate setting 10
data retries 27
default configuration
RADIUS 4
delivery traffic indication message (DTIM) 26
DFS 19
diversity 22
documentation
Cisco 1800 series routers 13
Cisco 800 series routers 13
Cisco High-Speed WAN Interface Card 12
Cisco IOS software 13
dot11 aaa mac-authen filter-cache command 14
dot11 extension aironet command 23
dot11 holdoff-time commands 15
dot11 interface-number carrier busy command 29
dot1x client-timeout command 15
dot1x reauth-period command 15
DTIM 26
Dynamic Frequency Selection 19
E
EAP authentication, overview 4
EAP-FAST 1, 2
EAP-FAST authentication 16
EAP-MD5 authentication
setting on client and access point 18
EAP-SIM authentication
setting on client and access point 18
EAP-TLS authentication
setting on client and access point 17
encapsulation dot1q command 6
encapsulation method 24