CHAPTER
2-1
Cisco Wireless ISR and HWIC Access Point Configuration Guide
OL-6415-04
2
Configuring Radio Settings
This chapter describes how to configure radio settings for the wireless device. This chapter includes
these sections:
• Enabling the Radio Interface, page 2-2
• Roles in Radio Network, page 2-2
• Configuring Network or Fallback Role, page 2-3
• Sample Bridging Configuration, page 2-4
• Universal Client Mode, page 2-7
• Configuring Universal Client Mode, page 2-7
• Configuring Radio Data Rates, page 2-10
• Configuring Radio Transmit Power, page 2-12
• Configuring Radio Channel Settings, page 2-14
• Enabling and Disabling World Mode, page 2-20
• Enabling and Disabling Short Radio Preambles, page 2-21
• Configuring Transmit and Receive Antennas, page 2-22
• Disabling and Enabling Access Point Extensions, page 2-23
• Configuring the Ethernet Encapsulation Transformation Method, page 2-23
• Enabling and Disabling Reliable Multicast to Workgroup Bridges, page 2-24
• Enabling and Disabling Public Secure Packet Forwarding, page 2-25
• Configuring Beacon Period and DTIM, page 2-26
• Configuring RTS Threshold and Retries, page 2-27
• Configuring Maximum Data Retries, page 2-27
• Configuring Fragmentation Threshold, page 2-28
• Enabling Short Slot Time for 802.11g Radios, page 2-28
• Performing a Carrier Busy Test, page 2-29
To Next Page
Loading...
