Cisco ISR User Manual

Contents
4
Cisco Wireless Router and HWIC Configuration Guide
OL-6415-04
Configuring Universal Client Mode 7
Configuring Radio Data Rates 10
Configuring Radio Transmit Power 12
Limiting the Power Level for Associated Client Devices 13
Configuring Radio Channel Settings 14
DFS Automatically Enabled on Some 5-GHz Radio Channels 19
Enabling and Disabling World Mode 20
Enabling and Disabling Short Radio Preambles 21
Configuring Transmit and Receive Antennas 22
Disabling and Enabling Access Point Extensions 23
Configuring the Ethernet Encapsulation Transformation Method 23
Enabling and Disabling Reliable Multicast to Workgroup Bridges 24
Enabling and Disabling Public Secure Packet Forwarding 25
Configuring Protected Ports 26
Configuring Beacon Period and DTIM 26
Configuring RTS Threshold and Retries 27
Configuring Maximum Data Retries 27
Configuring Fragmentation Threshold 28
Enabling Short Slot Time for 802.11g Radios 28
Performing a Carrier Busy Test 29
CHAPTER 3 Configuring Multiple SSIDs 1
Understanding Multiple SSIDs 2
SSID Configuration Methods Supported by Cisco IOS Releases 2
Configuring Multiple SSIDs 3
Creating an SSID Globally 3
Using a RADIUS Server to Restrict SSIDs 5
Configuring Multiple Basic SSIDs 6
Requirements for Configuring Multiple BSSIDs 6
Guidelines for Using Multiple BSSIDs 6
Enabling MBSSID and SSIDL at the same time 7
Sample Configuration for Enabling MBSSID and SSIDL 8
CHAPTER 4 Configuring an Access Point as a Local Authenticator 1
Understand Local Authentication 2
Configure a Local Authenticator 2
Guidelines for Local Authenticators 3

Cisco ISR Specifications

General

Brand	Cisco
Model	ISR
Category	Wireless Access Point
Language	English