Cisco Linksys WUSB54G - Figure 5-26: the Congratulations Screen; Figure 5-27: Available Wireless Network

36
Chapter 5: Using the Wireless Network Monitor
Creating a New Profile
Wireless-G USB Network Adapter
2. After the software has been successfully installed, the Congratulations screen will appear. Click Connect to
Network to connect to your network.
Congratulations! Setup is complete.
Setting Up the Adapter with Manual Setup
If you are not taking advantage of Secure Easy Setup and your network is not listed among the available
networks, click Manual Setup on the Available Wireless Network screen to set up the adapter manually.
1. After clicking Manual Setup, the Network Settings screen will appear. If your network has a router or other
DHCP server, click the radio button next to Obtain network settings automatically (DHCP).
Figure 5-26: The Congratulations Screen
Figure 5-27: Available Wireless Network