43
Chapter 5: Using the Wireless Network Monitor
Creating a New Profile
Wireless-G USB Network Adapter
LEAP
If you selected LEAP, then enter the Username and Password that will authenticate you on your wireless
network. Windows XP and 2000 users can also enable LEAP CCKM, and select the Encryption, if they enabled
CCX2.0 on the Advanced Wireless Settings screen.
Username - Enter the username used for authentication.
Password - Enter the password used for authentication.
Confirm - Enter the password again.
LEAP CCKM - Windows XP and 2000 users can enable this Cisco Central Key Management method if they
enabled CCX2.0 on the Advanced Wireless Settings screen.
Encryption - Windows XP and 2000 users can select an encryption method if they enabled CCX2.0 on the
Advanced Wireless Settings screen.
Click the Next button to continue, or click the Back button to return to the previous screen.
Figure 5-39: LEAP - Windows XP and 2000
Figure 5-40: LEAP - Windows 98SE and ME
To Next Page
Loading...
Need help?
General