Cisco Meraki CW91661-MR - 4.2.2 Power the CW91661-MR, CW9164 I-MR

13

4.2.1.2 ElectricalJunctionBoxMountUsingMountPlate 
TheCW9166I‐MR,CW9164I‐MRcanbemountedto a4”squarecablejunctionbox,a3.5or4”round
cablejunctionbox,or
 variousU.S.andEuropeanoutletboxes(mo untingscrewsarenotincluded). 

Usingappropriatemountinghardwareforyourspecifictypeofjunctionbox,attachthemount 



4.2.2 PowertheCW9166I‐MR ,CW9164I‐MR 
Ifmountingtoanelectricaljunctio nbox,feedtheEthernetcablethroughthecableaccessholeintheMou nt
Plate.


If mountingtoa wall orceiling, theEthernet cablewill feedthroughthecable slotonbottom oftheCW9166I‐
MR,CW9164I‐MR.