Cisco MERAKI MS425 Series User Manual

8. (Optional) Install additional SFP+ or QSFP+ units as needed, depending on the compatibility of your model.
Mounting hardware
The mounting hardware includes a rack mount kit for standard 1U racks. When installing the device, make sure that there is sufficient space between the rear of
the rack and other obstacles to ensure adequate airflow.
Bringing your Stack Online
When connecting up your MS425 for the first time all of the ports are set as ethernet. Once the switches are online you can convert any port to a Stack port by
simply selecting the option under the interface configuration as shown below:
12

Cisco MERAKI MS425 Series Specifications

General

Stacking Ports	2 x 40G QSFP+
Layer Support	Layer 3
VLAN Support	Yes, up to 4094 VLANs
ACL Support	Yes
QoS Support	Yes
PoE Support	No
Operating Temperature	32°F to 104°F (0°C to 40°C)
Operating Humidity	5% to 95% non-condensing
Model	MS425-16, MS425-32
Forwarding Rate	476 Mpps
Ports	16 x 10G SFP+
Management	Managed via the Meraki cloud
Stacking	Yes