Cisco NCS 5500 Series Command Reference

hw-module profile qos max-classmap-size
To define the maximum number of class-maps per policy, use the hw-module profile qos max-classmap-size
command in the XR Config mode.
hw-module profile qos max-classmap-sizesize
Syntax Description
Indicates the maximum number of class-maps permitted per policy. Range is between 4 to 32, in powers
of 2.
size
Command Default
Default size is 32.
Command Modes
XR Config mode
Command History
ModificationRelease
This command was introduced.Release
6.0.0
Usage Guidelines
The router must be reloaded for the hw-module command to be functional.
This command only applies to ingress policies and only 4, 8, 16, or 32 classes per policy-map are supported.
Egress policies can support up to 8 classes per policy-map.
Task ID
OperationTask
ID
read,
write
qos
The following example shows how to change the maximum number of class-maps to 16.
RP/0/RP0/CPU0:router#config
RP/0/RP0/CPU0:router(config)#hw-module profile qos max-classmap-size 16
RP/0/RP0/CPU0:router(config)#commit
RP/0/RP0/CPU0:router# reload
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
9
QoS Classification Commands
hw-module profile qos max-classmap-size

Cisco NCS 5500 Series Specifications

General

Series	NCS 5500
Category	Network Router
Operating System	Cisco IOS XR
Product Type	Modular Router
Form Factor	Rack-mountable
Purpose	High-performance routing for service providers and large enterprises
Interface Types	Ethernet
Redundancy	Redundant power supplies and fan trays
Port Density	Varies by model; high-density configurations available
Routing Protocols	BGP, OSPF, IS-IS, MPLS
Power Supply Options	AC and DC power supplies available
Management	CLI, SNMP, NETCONF