Cisco NCS 5500 Series Command Reference

Congestion Management Commands
All commands applicable for the Cisco NCS 5500 Series Router are also supported on the Cisco NCS 540
Series Router that is introduced from Cisco IOS XR Release 6.3.2. References to earlier releases in Command
History tables apply to only the Cisco NCS 5500 Series Router.
Note
This chapter describes the commands used to manage congestion.
• decapsulate gre, on page 42
• police rate, on page 43
• policy-map, on page 45
• priority (QoS), on page 47
• vrf-policy, on page 48
• show qos interface , on page 49
• show policy-map interface, on page 55
• show policy-map targets, on page 60
• show policy-map type pbr, on page 62
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
41

Cisco NCS 5500 Series Specifications

General

Series	NCS 5500
Category	Network Router
Operating System	Cisco IOS XR
Product Type	Modular Router
Form Factor	Rack-mountable
Purpose	High-performance routing for service providers and large enterprises
Interface Types	Ethernet
Redundancy	Redundant power supplies and fan trays
Port Density	Varies by model; high-density configurations available
Routing Protocols	BGP, OSPF, IS-IS, MPLS
Power Supply Options	AC and DC power supplies available
Management	CLI, SNMP, NETCONF