Cisco NCS 5500 Series Command Reference

Preface
This preface contains these sections:
• Changes to This Document, on page v
• Obtaining Documentation and Submitting a Service Request, on page v
Changes to This Document
This table lists the technical changes made to this document since it was first released.
Table 1: Changes to This Document
SummaryDate
Initial release of this document.December 2015
Republished with documentation updates for Cisco
IOS XR Release 6.0.2 features.
July 2016
Republished with documentation updates for Cisco
IOS XR Release 6.1.x features
November 2016
Republished with documentation updates for Cisco
IOS XR Release 6.1.31 features
May 2017
Republished for Release 6.3.2.March 2018
Republished for Release 6.5.1.July 2018
Obtaining Documentation and Submitting a Service Request
For information on obtaining documentation, using the Cisco Bug Search Tool (BST), submitting a service
request, and gathering additional information, see What's New in Cisco Product Documentation.
To receive new and revised Cisco technical content directly to your desktop, you can subscribe to the What's
New in Cisco Product Documentation RSS feed. RSS feeds are a free service.
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
v

Cisco NCS 5500 Series Specifications

General

Series	NCS 5500
Category	Network Router
Operating System	Cisco IOS XR
Product Type	Modular Router
Form Factor	Rack-mountable
Purpose	High-performance routing for service providers and large enterprises
Interface Types	Ethernet
Redundancy	Redundant power supplies and fan trays
Port Density	Varies by model; high-density configurations available
Routing Protocols	BGP, OSPF, IS-IS, MPLS
Power Supply Options	AC and DC power supplies available
Management	CLI, SNMP, NETCONF