Cisco NCS 5500 Series - Removing the 40-Gigabit QSFP+ or 100-Gigabit QSFP28 Transceiver Module

RP/0/RP0/CPU0:router(config)# class-map map1
RP/0/RP0/CPU0:router(config-cmap)# match access-group ipv4 map1
RP/0/RP0/CPU0:router(config-cmap)# match access-group ipv6 map2
Modular QoS Command Reference for Cisco NCS 5500 Series and Cisco NCS 540 Series Routers
12
QoS Classification Commands
match access-group